Watco Flowpatch Deep Fill | Quick Setting, Pourable Repairs For Deep Holes In Heavily Trafficked Floors

Watco Flowpatch® Deepfill is an easy to mix pourable material for quick repairs to deep holes in level concrete, inside or outside. Watco Flowpatch® Deepfill is very strong and hardens quickly: it will accept heavy traffic including forklifts only 2 hours after application. Watco Flowpatch® Deepfill will resist oils and grease. If greater chemical resistance is required, please use Watco Concrex®. It can be applied at any depth between 10mm -200mm and repairs can be feather edged in light traffic areas. When mixed, Watco Flowpatch® Deepfill will be pourable so is not suitable for repairs to sloping floors or exposed edges. After curing, Watco Flowpatch® Deepfill can be painted with any suitable Watco floor paint. If the floor being repaired is very rough, you may wish to screed the whole floor with Watco Flowtop® for a smooth flat surface before painting. The surface is inherently anti slip in dry conditions. Overcoating with Watco Safety Grip® is recommended if positive anti slip is required in very wet or oily conditions. Watco Safety Coat is available where a general level of slip resistance is required. Watco Flowpatch® Deepfill Typical Compressive Strength at 20°C: 1 day: >20N/mm2 , 7 days: >35N/mm2 , 28 days: >45N/mm2 Watco Concrex® is recommended for repairs to ramps, steps and for reforming edges. For resurfacing or levelling larger areas of rough or tamped concrete, use Watco Flowtop®.

Where to use

• Ideal for filling deep holes before screeding with Watco Flowtop

Coverage

0.5m2 at 25mm thick

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    MSDS SHEET - BASE  | DOWNLOAD