RMS Probit Colour Neutral Cold Joint Paint

Probit Colour Neutral Cold Joint Paint is a cold applied, anionic joint sealant based on a synthetic  binder, which is specially formulated for use on vertical and horizontal joint faces on coloured  asphalt and macadam surfaces where an aesthetically pleasing joint is required. This material  meets the guide for specification in Clause NG 6.5(2) of Appendix NG 6 of the Highways, Roads  and Street Works Act 1991. Probit Colour Neutral Cold Joint Paint is manufactured as a cream  emulsion, enabling it to be pigmented to match the coloured asphalt or macadam surface it is  being used to seal if required.

All surfaces to be sealed must be clean and free from dust and foreign matter. Stir well before  use. Apply with a dampened soft bristle brush uniformly as a thin coat. Jobling Purser’s Longerlife Tar Brush is ideal for this. Theoretical coverage on a 40mm deep joint is 1kg of Probit  Colour Neutral Cold Joint Paint per 15 linear meters pro-rated for other depths. Application rates  will also vary depending upon the size the porosity and texture of the joint. Probit Colour Neutral  Cold Joint Paint is a water based product and is only resistant to rain when it has fully set – water  will attack the un-dried film. Drying time depending on ambient weather conditions will be  normally 30 – 45 minutes. 

Application

All application equipment should be clean and free from bitumen to avoid colour contamination of  the neutral coloured emulsion. Avoid application when rain is imminent,as the material is only  resistant to rain when it has fully dried.

Wash residual material off with cold water before it has dried. Remove any dried film with Jobling  Purser’s Armaclean Eco Plus or Proclean bitumen cleaner.

Storage

Protect from frost when not in use. Keep container tightly closed. When stored correctly and left unopened, Probit Colour Neutral Cold Joint Paint has a shelf life of 6 months.

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    MSDS SHEET | DOWNLOAD