Resdev Intrica PAS Clear | Clear Aliphatic Polyaspartic Top Coat

Intrica PAS Clear is a clear, two-component solvent free polyaspartic floor coating. Intrica PAS Clear provides a UV-resistant, tough, hard wearing coating for use over decorative flake or quartz broadcast systems.

Where to use

Intrica PAS Clear provides a UV-resistant, tough, hard wearing coating for use over decorative flake or quartz broadcast systems.

Coverage

The coverage rate will vary depending on the texture and porosity of the substrate, film thickness and application technique. Two coats may be required to avoid missed spots. The mixed density of the material is approximately 1100 kg/m3 . As a guide, an application rate of 3.6 to 4.5 m2 /kg will produce a film thickness of 200 to 250 microns on smooth, non-porous surfaces and thoroughly de-nibbed and sanded flake systems. On textured surfaces such as 0.4 - 0.8 mm coloured quartz, typical coverage rates of 2.0 to 3.0 m2 /kg may be expected. Do not apply at thicknesses greater than 250 microns as these films will take significantly longer to through cure.

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD