Osmo TopOil Surface Kit

An all-in-one maintenance kit for worktops and table tops

• x1 500ml TopOil 3058 (Clear Matt)
• x1 500ml Spray Cleaner (8026)
• x1 Hand Pad Holder
• x1 Oil Finish Application Fleece
• x1 Abrasive Pad
• x1 Pair of Gloves
• Food Safe

Instructions

Surface Preparation

• Wood surface must be clean, dry and frost-free (moisture content max. 18%).
  Osmo TopOil is ready to use. Do not thin. Stir well before use.
  Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed. As a general rule, wear a dust mask during sanding works.
  Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler).
  Sand wood surfaces carefully. Begin with coarse sandpaper then progress to finer grades– final sanding work for furniture P150-240 (depending on wood species ). For kitchen work tops using absorbent hardwoods like Oak or Beech, final sanding grade P120. For very absorbent woods like Pine, sand to a maximum of P150.

   

• For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.

   

• Before oiling the surface, remove sanding dust with a soft brush or vacuum cleaner.
  The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Method Of Application

• Apply the first coat thinly along the wood grain with the Oil Finish Application Fleece supplied. Remove any excess TopOil with a clean, dry lint free cloth.

  Allow to dry for approx. 8-10 hours. Ventilate well while drying.
  Thinly apply the second coat with the Oil Finish Applicator Fleece. Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
  For renovations, one coat applied to the clean and dry surface with an Oil Finish Applicator Fleece or lint-free cloth is usually sufficient.

  Once the TopOil has fully cured, clean the newly oiled surface using the cleaning spray supplied as and when required.

  The supplied abrasive pad can be used to help remove minor scratches, scuffs or dirt from waxed or oiled work surfaces prior to cleaning and renovation.

Care

• Regular Cleaning: Dust mopping. Damp mopping using Osmo Spray-Cleaner.

   

• Occasional Maintenance: Intensive cleaning and refreshing using Osmo Liquid Wax Cleaner or Osmo Maintenance Oil.

   

• Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Suitability

Recommended

Kitchen wooden worktop and tables.

Top Tips

• Shake very well before use. Failure to mix all ingredients ( and colour) could lead to an increased patchiness.
• For dark and extractive-rich woods (e.g. Iroko, Teak, Mahogany, Sapele, Wenge, Merbau, Jatoba, Cedar etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended.
• For kitchen worktops, Osmo Wood Protector 4006 is an optional pre-treatment for absorbent wood like: Pine, Birch or Spruce. Osmo Wood Protector 4006 will help to raise the water repellant qualities of the timber prior to applying Osmo Top Oil.
• Wood pre-treated with Osmo Wood Protector 4006 may appear a little more dark and colour intensified. Always trial apply Osmo Top Oil 3068 Natural over the Wood Protector 4006 to ensure the final appearance meets with expectations.
• Avoid covering during drying and curing. After 2-3 weeks, the surface is fully cured.
• Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.
• Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining.
  

Coverage

• 24m²/L with one coat (TopOil), Depends heavily on the amount of dirt and stains (Spray Cleaner)

Data Sheet   

    PRODUCT DATA SHEET TOP OIL | DOWNLOAD

    PRODUCT DATA SHEET SPRAY CLEANER | DOWNLOAD

    SAFETY DATA SHEET TOP OIL | DOWNLOAD

    SAFETY DATA SHEET SPRAY CLEANER | DOWNLOAD