Osmo Country Colour

• Extremely weather and UV resistant
• Very water and dirt resistant
• Reduces wood swelling and shrinkage
• Natural wood grain is hidden
• Microporous, breathable finish which does not crack, peel or flake
• No sanding necessary for future applications
  

Instructions

Surface Preparation

• Wood surface must be clean, dry and frost-free (moisture content max. 20%).
  Osmo Country Colour is ready to use. Do not thin. Stir well before use.
  If possible, please apply the first coat to all sides before installation.
  Clean old microporous stains thoroughly. Old paints and lacquers must be completely removed.
  As a general rule, wear a dust mask during sanding works.
  The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
  If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

Method Of Application

• With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
  Allow to dry for approx. 10-12 hours under good ventilation.
  After drying, apply a second coat – also thinly.
  For renovation works, one coat applied to the clean and dry surface is usually sufficient.

Care

• Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

   

• Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

   

• Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

Note

• If surfaces in outdoor areas (e.g. windows, cladding) should have additional protection, apply one top coat of Osmo UV-Protection-Oil Clear (410 without film protection or 420 with film protection) after thoroughly drying. This protects against dirt contamination and extends the life of the finish. For Country Colour White 2101, please use Natural Oil Woodstain White 900.

  Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.

  Using power washers will severely decrease the coverage of the finish and general or multi-purpose cleaners will increase the frequency of maintenance and recoating.

Suitability

Recommended

Exterior wood surfaces

For all other wood types not mentioned, always trial apply first.

• Oak
• Beech
• Ash
• Alder
• Birch
• Thermowood and Thermally Modified Timber (TMT): prone to grey very fast and therefore application is recommended within the first two weeks after processing. Decking-Oil 010 Thermowood is optically suitable.
  

For the following wood types, WR Base Coat is recommended before use.

• Accoya®
• Kebony®
• Pine
• Spruce
  

For the following wood types, a weathering period is recommended. New or sanded wood requires at least 12 weeks (approximate) exposure to the exterior elements before application.

After the weathering period, it’s generally recommended to clean the surface from the extractive content before application, always trial apply!

For all other ingredient-rich hardwood species not mentioned may require a varied period of exposure. Please contact us for further information.

• Cedar
• Iroko
• Mahogany
• Teak
• Walnut
• Ipe
• Merbau
• Wenge
• Rosewood
• Sycamore
• Sapele: 3-4 weeks exposure
• Larch: 2 weeks exposure. Application of WR Base Coat is recommended before use.
• Douglas Fir: 2 weeks exposure. Application of WR Base Coat is recommended before use.
• Pressure-Impregnated Wood: Approx. 12 weeks exposure to heavy rain (winter periods) or approx. 6 months exposure to light rain (summer periods) to wash out the salts used for impregnation.
  

Coverage

• 26m²/L with one coat

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    SAFETY DATA SHEET | DOWNLOAD