Altro Coat™ Standard | Water Dispersed Epoxy Coating

Altro Coat standard is a twin-pack water-miscible, moisture tolerant epoxy coating with a silk finish. It has been designed to tolerate construction moisture and is ideally suited for use onto newly installed cementitious substrates. With greatly reduced substrate drying time, Altro Coat variants provide a fast-track, cost-effective solution, permitting the passage of moisture vapour from the substrate, while still providing a barrier against contamination from operations above. It is available in a wide standard colour range with options for bespoke colours.

Where to use

Typical areas of use include:
l Light to medium duty areas
l New build fast-track
l Warehouses
l Storage areas
l Custodial areas
l Plant rooms

Coverage

Altro Coat standard coloured:
1st coat 27m² per 5.5kg
2nd coat 39m² per 5.5kg
Altro Coat standard clear:
1st coat 19m² per 3.8kg
2nd coat 27m² per 3.8kg
Altro Coat vertical coloured:
1st coat 33m² per 5.5kg
2nd coat 44m² per 5.5kg
Altro Coat slip resistant coloured:
1st coat 25m² per 5.7kg
2nd coat 35m² per 5.7kg
Where the substrate is porous, the first coat of Altro Coat
variant may be diluted with clean de-ionised water at up to
20% to pre-seal the substrate prior to the application of a
further two coats.
Material usage is dependent upon temperature, surface profile
and porosity; the stated coverage rates should be referred
to for guidance only and cannot be relied upon to determine
exact quantities. Priming of porous substrates will improve the
coverage rates. Pale colours may require additional coats to
cover a dark substrate.
Although stringent quality assurance processes are employed,
when colour consistency is essential a single batch should be
used where possible.

Data Sheet   

    PRODUCT DATA SHEET | DOWNLOAD

    MSDS SHEET - BASE | DOWNLOAD

    MSDS SHEET - CURING AGENT | DOWNLOAD